Xingtai Zhongyao Chemical Co., Ltd. | Established 2016 | magnesium oxide and hydroxide manufacturing, industrial-grade magnesium salts, rubber, cable, flame retardant, environmental, ceramics | August 21, 2026
要点
- 表面改性化学比原始纯度更能决定填料与基体的相容性
- 吸油量和粒度分布控制高负载下的加工性能
- PVC 浆料粘度降低证明界面润湿得到改善
- 热分解范围决定阻燃效率窗口
真正的问题:为什么 60 wt% 的添加量会破坏大多数 PE 化合物
Every compounder hits the same wall. You push magnesium hydroxide loading past 50 wt% to meet flame retardancy standards, and the mechanical properties collapse. Impact strength drops by half. Melt flow index hits zero. The part looks like chalk dust pressed into plastic.
The root cause is rarely the magnesium hydroxide itself.It is the interface between filler and polymer matrix.
Untreated Mg(OH)2 particles agglomerate, wick moisture, and act as stress concentrators.Substandard raw materials make this worse, with inconsistent particle size distribution and residual ionic impurities that catalyze polymer degradation.
A surface-modified grade changes the entire picture. With silane and stearate treatment, the filler surface becomes organophilic. Wetting improves. Dispersion stabilizes. The compound flows again.
This review examines what actually matters when selecting a modified Mg(OH)2 for flame retardant PE, LSZH cables, and PVC systems. The data comes from production-grade specifications and documented test results, not lab-scale promises.
产品概述及定位
Modified Mg(OH)2 sits in a specific performance window. The base material is high-purity magnesium hydroxide, surface-treated with approximately 5% silane and stearic acid by weight. This treatment layer converts the hydrophilic hydroxyl surface into a hydrophobic, polymer-compatible interface.
The positioning is straightforward. Unmodified Mg(OH)2 requires 55-65 wt% loading to achieve UL94 V-0 in EVA or PE. That loading destroys mechanical properties. Modified grades achieve the same flame rating at comparable loading but retain far more of the original polymer properties.
The key metrics that separate usable products from problematic ones:
| 参数 | 规格 | 单元 | 为什么它很重要 |
|---|---|---|---|
| 表面处理 | ~5 | % | 硅烷/硬脂酸酯比例控制相容性 |
| 吸油量 | ≤35 | 毫升/100克 | 预测树脂需求和化合物粘度 |
| 白度 | ≥98 | % | 表明纯度和低过渡金属含量 |
| 粒径(D50) | 1-2 | µm | 平衡分散性与阻燃效率 |
This grade is engineered for loadings around 60 wt% in polyethylene while keeping impact loss under 30% and maintaining measurable melt flow. That is the performance envelope that matters for wire, cable, and injection molded flame retardant parts.
技术参数深入探讨
表面处理化学:改变一切的 5%
The 5% silane/stearate surface treatment is not arbitrary. Silane coupling agents form covalent bonds with the hydroxyl groups on the Mg(OH)2 surface. The organofunctional end then interacts with the polymer matrix. Stearic acid adds a physical barrier layer that reduces interparticle friction and improves wetting.
This dual treatment produces measurable effects. In PVC paste applications, modified Mg(OH)2 shows an obvious viscosity reduction compared to untreated filler. Lower paste viscosity means faster processing, better air release, and more consistent coating thickness.
For PE compounds, the treatment layer reduces agglomeration forces. Primary particles stay dispersed instead of clustering into stress concentrators. The result is better physical and mechanical properties in the final composite.
吸油量:加工性能的把关者
Oil absorption of ≤35 ml/100g is the specification that controls how much resin you need to wet out the filler surface. Higher oil absorption means more polymer is consumed just coating particles, leaving less for the continuous phase.
At 60 wt% loading, this parameter becomes critical. A product at 35 ml/100g will compound differently than one at 45 ml/100g. The higher oil absorption grade will produce stiffer, harder-to-process compounds with higher viscosity and more shear heating during extrusion.
粒径分布:D50 1-2 µm
The 1-2 µm D50 range represents a deliberate trade-off. Smaller particles (nano-scale, <200 nm) improve flame retardant efficiency through higher surface area and more uniform dispersion. But they also increase viscosity and are harder to disperse without agglomeration.
Larger particles (10 µm+) compound easily but require higher loading to achieve the same flame retardancy. The 1-2 µm window balances these competing demands.
For LSZH cable compounds, this particle size range also contributes to surface finish quality. Coarse particles create rough surfaces on extruded cable jackets, which can harbor moisture and initiate water treeing.
纯度和白度:隐藏的质量标记
Whiteness of ≥98% is more than cosmetic. Transition metal impurities, especially iron, catalyze oxidative degradation of polymers during processing and service. Iron content below 10 ppm is specified for photovoltaic grades because iron catalyzes UV-induced yellowing in EVA films.
The same logic applies to PE compounds. Low iron content means better long-term color stability and reduced risk of mechanical property drift during weathering.
业绩与行业比较
阻燃机制:数字的含义
Magnesium hydroxide decomposes endothermically at 340-490°C, releasing 31% water by weight. This decomposition absorbs heat from the polymer substrate, dilutes flammable volatiles with steam, and leaves a magnesium oxide char layer that insulates the underlying material.
The decomposition temperature window matters. PE processes at 180-220°C. The filler must remain thermally stable during processing but decompose before the polymer reaches its ignition temperature. The 340-490°C range achieves exactly this.
At 55-65 wt% loading in EVA or PE, this mechanism achieves UL94 V-0 with smoke density below 100. Compare this to halogenated flame retardants, which produce dense smoke and toxic combustion products.
PVC 系统:粘度和相容性
In flexible PVC, modified Mg(OH)2 serves dual duty as flame retardant and smoke suppressant.More than 80% of fire deaths are attributed to smoke and toxic gas inhalation, not direct burns.
Halogenated systems burn with dense black smoke.Magnesium hydroxide suppresses smoke formation by promoting char formation and diluting fuel gases.
Test data confirms the modified grade provides an obvious viscosity reduction effect in PVC paste. The treated particles wet out faster and more completely, reducing the resin demand and improving the flow characteristics of plastisols.
LSZH 电缆料:最严格的应用
LSZH (Low Smoke Zero Halogen) cables demand the full performance envelope. The compound must pass flame tests, maintain low smoke density, and survive long-term outdoor exposure.
The LSZH-certified grade with D50 of 1-2 µm and soluble sodium below 0.01% delivers smoke density below 50 and halogen acid content under 0.5%. It also passes 72-hour water treeing resistance testing at 12 kV, which simulates decades of service in wet environments.
For solar cable applications, the material meets TÜV and IEC flame retardancy requirements while maintaining compatibility with XLPE and EVA crosslinking systems.
行业背景:改性 Mg(OH)2 适用范围
Organic flame retardants, primarily halogenated compounds and phosphate esters, still account for more than 80% of flame retardant consumption in China. This is changing. Regulatory pressure, fire safety standards, and environmental concerns are driving conversion to halogen-free systems.
Modified Mg(OH)2 is the primary halogen-free alternative for polyolefin systems.It offers the best balance of flame retardancy, smoke suppression, and cost among non-halogenated options.
For Magnesium Hydroxide Flame Retardants, the modified grades represent the current state of the art.
常见问题 (FAQ)
为什么表面改性会降低 PVC 糊料的粘度?
The silane/stearate treatment layer shields the hydrophilic hydroxyl groups on the particle surface. This reduces particle-particle hydrogen bonding and improves wetting by the plasticizer and resin system. Untreated particles form networks that trap solvent and raise viscosity.
在不破坏机械性能的情况下可实现的最大负载是多少?
Modified grades maintain impact strength loss below 30% even at 60 wt% loading in PE. Untreated filler at this loading typically loses 50-60% of impact strength due to poor dispersion and weak interfacial adhesion.
如何验证表面处理质量?
Measure oil absorption and check it stays at or below 35 ml/100g. Test compound viscosity at the target loading. Run a melt flow index test — treated grades maintain measurable MFI at high loading, untreated grades often show zero flow.
白度真的是质量指标吗?
Whiteness above 98% correlates with low iron and transition metal content. These metals catalyze polymer degradation, cause yellowing during processing, and accelerate UV aging in outdoor applications. For EVA photovoltaic films, iron below 10 ppm is mandatory to maintain >90% transmittance over 25 years.
改性Mg(OH)2可以直接替代卤系阻燃剂吗?
Not without reformulation. The loading required is higher (55-65 wt% versus 20-30 wt% for halogens), which changes rheology and mechanical properties. Processing temperatures must stay below the decomposition onset. But the smoke and toxicity benefits are substantial.
多大的粒径最有利于阻燃效率?
For most polyolefin applications, 1-2 µm D50 provides the best balance of dispersion, flame retardancy, and processability.Nano-scale particles below 200 nm improve efficiency further but increase viscosity and dispersion difficulty.
For Industrial Magnesium Oxide applications requiring different particle characteristics, separate grades exist.
结论
Modified Mg(OH)2 is the workhorse of halogen-free flame retardancy in polyolefins.The 5% silane/stearate surface treatment transforms a hydrophilic mineral into a polymer-compatible functional filler.
The measurable outcomes are clear: 60 wt% loading in PE with under 30% impact loss, viscosity reduction in PVC paste, and LSZH cable compounds meeting strict smoke and electrical requirements.
The specification sheet tells the story. Oil absorption at ≤35 ml/100g predicts processability. Whiteness at ≥98% confirms purity. Particle size at 1-2 µm balances dispersion against efficiency. And the 340-490°C decomposition window aligns thermal release with polymer combustion behavior.
Selecting a modified Mg(OH)2 is about verifying these parameters against your specific process. Test the oil absorption. Measure compound viscosity at your target loading. Run the MFI test. These numbers will tell you more about batch-to-batch consistency than any certificate of analysis.
For compounders pushing loading limits, the modified grade is not an option — it is the enabling technology. The surface chemistry converts a cheap mineral into a high-performance engineering filler. That is the difference between a compound that processes cleanly and one that fails on the line.
Overall score: 8.5/10 — Recommended for PE, PVC, and LSZH cable applications requiring high loading with retained mechanical properties.