Zhongyao Chemical ZHONGYAOTECH
Rubber & Plastics
Premium Solution

Rubber & PlasticsSolutions

Advanced Magnesium Solutions for Polymer Processing

Scorch Prevention
Neutralizes HCl and ...
Accelerated Vulcanization
Reduces vulcanizatio...
Enhanced Performance
Improves tensile str...
Scroll to Explore
Industry Overview

Tailored Solutions
for Rubber & Plastics Industry

In the rubber and plastics industry, magnesium-based compounds play a crucial role. MgO acts as an acid acceptor and scorch retarder, effectively neutralizing acidic substances released during processing of halogenated rubbers (such as CR, EPDM), preventing premature vulcanization, and extending compound shelf life by 3-6 months. It also accelerates vulcanization reactions by 20-30%, shortening molding cycles and reducing energy consumption.

01

Scorch Prevention

Neutralizes HCl and other acids, raising safe processing temperature to 120°C

02

Accelerated Vulcanization

Reduces vulcanization time by 20-30%, boosting production efficiency

03

Enhanced Performance

Improves tensile strength by 15-25%, enhances heat resistance to 150°C

04

Extended Shelf Life

Extends compound storage from 2-3 months to 6-9 months

Application Scenarios

Real-World Applications

From lab to production line, our solutions have been validated in leading global enterprises

Tire Manufacturing
01

Tire Manufacturing

Active MgO is added to tire sidewall and tread compounds as a vulcanization accelerator and heat stabilizer.

Technical Points

Accelerates sidewall compound vulcanization, reducing molding time by 25-30%
Enhances dimensional stability at high temperatures, preventing sidewall cracking
Improves processing safety of NR/BR compound
Typical dosage: 3-5 phr (parts per hundred rubber)
Active Magnesium OxideMgO for Tires
Cable Insulation
02

Cable Insulation

MgO provides dual functionality in CSM and EPDM cable jackets: electrical insulation + acid neutralization.

Technical Points

Dielectric strength >20 kV/mm, meeting high-voltage cable requirements
UV aging resistance 5000h without cracking (accelerated test)
Oil swell <5% (Fuel C immersion 168h)
Recommended specific surface area: 60-80 m²/g
MgO for Rubber Sheathed CablesActive Magnesium Oxide
Rubber Hoses
03

Rubber Hoses

In NBR, CSM, FKM oil-resistant hoses, MgO prevents swelling and degradation caused by acidic media.

Technical Points

Volume change <5% (Fuel C, 60°C, 168h)
Service life extended 2-3x (vs unprotected formula)
Activity range: 100-140s (citric acid method)
Ultrafine particle size, no filter clogging
MgO for Rubber HosesLight Magnesium Oxide
Seals & Gaskets
04

Seals & Gaskets

Automotive and industrial seals demand extreme dimensional stability; MgO ensures elasticity retention at high temperatures.

Technical Points

Compression set <25% (150°C×72h)
Hardness range: Shore A 60-90 adjustable
Synergy with ZnO for optimized crosslink density
Suitable for O-rings, oil seals, expansion joints
Active Magnesium OxideHigh Purity Magnesium Oxide
Recommended Products

Professional Product Series

Mg

Active Magnesium Oxide

Specialty MgO

Ultra-active MgO (iodine value ≥120 mg/g) engineered to prevent scorch in neoprene adhesives and extend rubber compound shelf life by 3-6 months.

Why Recommended

Ultra-high specific surface area (140 m²/g), iodine value ≥120 mg/g, ideal for CR rubber

View Details
Mg

MgO for Tires

Rubber Industry

Tire-grade MgO formulated to accelerate sidewall vulcanization by 20-30%, boost heat resistance to 150°C, and improve tensile strength by 15-25%.

Why Recommended

Optimized for tire formulations, balancing activity with processability, scorch prevention and accelerated vulcanization

View Details
Mg

MgO for Rubber Sheathed Cables

Cable Industry

Cable-grade MgO delivering 20+ kV/mm dielectric strength, UV aging resistance (5000h no cracking), and processing safety for mining/marine rubber cables.

Why Recommended

Dielectric strength 20+ kV/mm, UV + ozone aging resistant, specialized for mining/marine cables

View Details
Mg

MgO for Rubber Hoses

Rubber Industry

Hose-optimized MgO preventing acid-induced swelling, extending hydraulic hose life 2-3x, and enabling safe processing of halogenated rubber compounds.

Why Recommended

Wide activity window (100-140s), prevents acidic swelling from fuel/hydraulic oil

View Details
Mg

Light Magnesium Oxide

Specialty MgO

Light magnesium oxide supplied in two grades — HD-8 (D50 40-60 µm) and HD-9 (D50 1-2 µm) — for rubber compounding, ceramic sintering and electrical insulation applications.

Why Recommended

Ultrafine particle size (D50 1.5-10μm), 99%+ whiteness, suitable for light-colored rubber products

View Details

Performance Comparison of MgO Grades in Rubber

SpecificationActive MgOTire-Grade MgOLight MgOIndustrial MgO
Specific Surface Area (m²/g)140-16030-5040-6010-20
Iodine Value (mg/g)≥12060-8080-100<60
Scorch Time (s)200+150-180120-150<100
Vulcanization EffectExcellentGoodFairBasic
Whiteness (%)96+94+99+92+
Recommended UseCR/CIIR AdhesivesTire SidewallLight ProductsDark Industrial

Case Studies

Global Tire Manufacturer: Sidewall Formula Optimization

Challenge

Original formula used standard MgO with long vulcanization time (40 min), causing micro-cracks in sidewalls after high-speed driving.

Solution

Replaced with Xingtai Zhongyao 'Tire-Grade MgO', adjusted dosage to 4 phr.

Results

  • Vulcanization time reduced to 28 min (-30%)
  • Tensile strength increased 18% (from 22 MPa to 26 MPa)
  • No cracks after 150°C thermal aging (original cracked at 72h)
  • Annual energy cost savings ~¥2M (based on 5000 tires/day)

Cable Factory: LSZH Jacket Material Upgrade

Challenge

60% Mg(OH)₂ in EVA/PE achieved UL94 V-0 but impact strength dropped 50%, making cables brittle.

Solution

Switched to 'Modified Mg(OH)₂ (silane/stearic acid treated)' with a small amount of active MgO.

Results

  • At 60 wt% loading, impact strength retention improved to 70%
  • Melt index increased from 0.3 to 0.6 g/10min (extrudable)
  • Maintained UL94 V-0 rating, smoke density <50

FAQs

Why must chloroprene rubber (CR) use active magnesium oxide?
CR releases HCl during processing and storage, causing self-crosslinking (scorch). Active MgO's high surface area rapidly neutralizes HCl, extending safe operation time window. Ordinary MgO reacts too slowly, leading to compound scrap.
What's the difference between MgO and ZnO in tire formulations?
ZnO is mainly a vulcanization activator promoting sulfur crosslinking; MgO focuses on acid neutralization and thermal stability. Used synergistically, ZnO controls crosslink density, MgO prevents degradation - both are essential.
How to select the appropriate MgO particle size?
Particle size affects dispersion and reaction speed. Ultrafine (D50 <3μm) disperses fast but absorbs moisture; coarse (>10μm) is stable but less active. Recommended: ultrafine for CR adhesives, medium (5-8μm) for tires, standard for industrial hoses.
Does MgO affect color in rubber?
High-purity MgO (whiteness >96%) doesn't affect light-colored products. But iron content >0.05% may cause slight yellowing under UV. For light-colored soles and white seals, recommend 'Light MgO' or 'High-Purity MgO'.

Industry Trends & Future

1

Growing Demand for Eco-Friendly Rubber Additives

With REACH regulations tightening, traditional heavy metal activators (like lead salts) are banned, driving surge in demand for MgO as a green alternative.

2

EV Tire Special Requirements

EVs have high instant torque, requiring tires with greater tear resistance. Active MgO-modified formulas can improve tread wear by 15-20%.

3

LSZH Requirements for 5G Base Station Cables

Data centers and 5G facilities require cables meeting IEC 61034 (smoke density <50). Mg(OH)₂ + active MgO combination is the mainstream solution.

Technical Resources

Ready to Start
Your Project?

Xingtai Zhongyao's technical team has extensive industry experience and can provide professional formula suggestions and technical support based on your specific application needs.

10+
Years Experience
500+
Partner Companies
50+
Export Countries